Hunter Fan 42819-01 Completing Your Installation With or Without a Light Fixture, Step Title

7 • Completing Your Installation With or Without a Light Fixture

Step Title

Steps 7-1 – 7-3

Housing

Assembly Upper

Screw Switch

Housing

10

Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture.

The steps below direct you whether or not you are installing a light fixture.

WARNING: Use only the light fixture supplied with this fan model.

7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

7-2. Feed the upper plug connector through the center opening of the
housing.	7 •

7-3. Align the keyhole slots in the housing with the housing assembly

screws.Without

7-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling.

7-5. If you want to install the light fixture, proceed with step 7-6 now.

If you do not want to install the light fixture, proceed with step 7-10 now.

7-6. Remove the switch housing cap and plug button.

7-7.

the hole in the bottom on the lower switch housing. Use the

lower switch housing. Securely tighten the nut and washer onto

7-8.

7-9. Remove the wire nuts from the two wires from the lower switch housing. Use one wire nut to connect the black wire from the light

white wire from the lower switch housing.

Fixture CAUTION: Be sure no bare wire or wire strands are visible after making connections.

Light Fixture

Mounting Screws

Light Fixture

Mounting Screw

witch

using

11

Lig

Ass

Step 7-7

Step 7-4

Hunter Fan Company 42819-01 • 11/14/06 42819-01 • 11/14/06 Hunter Fan Company