Uninstalling the Light Fixture
7-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.
7-15. Disconnect the plug connectors between the two white wires.
7-16. Remove the two screws attaching the light kit to the lower switch housing.
7-17. Remove the light fixture from the lower switch housing, pulling disconnected wires through the hole in the center of the lower switch housing.
Note: When removing the wires, pull the thin plug connector (male) through first, and then pull the other plug connector (female) through the hole.
7-18. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing.
7-19. Install the switch housing cap and plug button to the lower switch housing.
7-20. Once you have uninstalled the light fixture, continue with step 7‑6.