|
|
|
Features | Menu Options | 6 |
| ||
|
|
5. Span 1: The next menu option is to set your thermostats primary span. Use the 
or 
buttons to adjust between 1, 2, or, 3 degrees. Press Next , the screen will flash
“Updated” and return to menu options or press 
to return to the home screen. The span setting regulates when and how long your system will run. The span has been set at the factory to 1 which will allow the system to turn on .5OF (.05OC) above or below the set temperature and run for .5 OF (.05OC) above or below the set temperature.
Example: If your thermostat is set to turn on at 72O in heat mode, with a span setting of 2, your thermostat will activate your furnace at 71Oand shut it down when it reaches 73O. For cooling at 72O with a span of 2, your air conditioner will activate at 73O and shut down at 71O. This setting can be changed to 1, 2, or 3. 1 will shorten your running time while 3 will lengthen it.
6. Span 2 & 3: Unless you have a 
or buttons to adjust between 1, 2, or, 3 degrees. Press 
Done/ once this has been
Home
changed or if you need to make no changes. Second and third stage spans act the same as your primary, but it determines when and how long your second or third stage heat runs.
7. Temp F/C: The | thermostat can | change | your temperature reading between | |
| Fahrenheit and Celcius. Use the | or | buttons to switch between Fahrenheit | |
| (F) and Celsius (C) Press Next , the screen will flash “Updated” and return to menu | |||
| options or press | Done/ |
|
|
34 | Home to return the the home screen. | |||
|
| |||
|
|
| ||
