installing the thermostat, cont.
ATTACHING THE THERMOSTAT
Lift the thermostat cover and set the SYSTEM switch to OFF and the FAN switch to AUTO.
1.Fan option - Locate the HE/HG switch on the back of the thermostat. Set the switch to HG (default) for gas furnace and oil burners. Set the switch to HE for electric furnaces. (The switch has no effect when the system is set to cooling mode.)
2.Recovery - Locate the Auto Recovery switch on the back of the thermostat. If you wish to use the Auto Recovery feature, verify that the switch is in the ENABLE position. If you do not wish to use this feature, simply change the switch to the DISABLE position. See pages
3.System type - Locate the System Type switch on the
back of the thermostat. Select either STD (Standard) or HP (Heat Pump) to match your system.
19
