Cub Cadet GT 3200 warranty C. Key Switch Module

Models: GT 3200

1 44
Download 44 pages 50.08 Kb
Page 12
Image 12
C. Key Switch Module

NOTE: A record of the actual hours of operation should be kept to assure maintenance procedures are com- pleted according to the schedule in this manual.

The Indicator Monitor will also remind the operator of maintenance intervals for changing the engine oil. The LCD will alternately flash the recorded hours, “CHG” and “OIL” for five min- utes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50- 52, 100-102, 150-152, etc.). The LCD will flash as described for five minutes every time the tractor’s engine is started during this maintenance inter- val. Follow the oil change intervals specified in the Maintenance section of this Manual and the engine manual.

C. Key Switch Module

The key switch module consist of a four position key switch, the “Reverse Push Button”, and a red indicator light. Refer to Figure 3.

The four key positions of key switch module (Refer to Figure 3) and their functions are as follows:

Stop — Stops the tractor engine and shuts down the tractor’s electrical circuits.

Reverse Caution Mode — This position allows the machine to be operated in reverse with the blades (PTO) engaged.

Normal Mowing — The normal operating position. All safety inter-

lock circuits are activated and the blades (PTO) will disengage when the tractor is driven in the reverse direction.

Start — Energizes the starter motor to crank and start the tractor engine. Release the key as soon as the engine starts and the key will return to “NORMAL MOWING” position.

To prevent accidental start- ing, remove the key from the key switch when the tractor is not in use.

Reverse Push Button — The orange/ triangular button at the top/right corner of the key switch module activates the system which allows the tractor’s blades (PTO) to remain engaged when the tractor is driven in the reverse direction. The key must be turned to the “REVERSE CAUTION MODE” and the operator must be in the tractor seat prior to depressing the button to activate the system.

The Red Indicator Light at the top/left corner of the key switch module comes “ON” to alert the operator that the key has been turned to the “Reverse Caution Mode” position, the “Reverse Push Button” has been depressed, and that the blades will remain engaged when the machine is driven in reverse.

IMPORTANT: Mowing in reverse is not recommended.

Indicator Light

 

 

 

 

 

 

 

 

 

 

Reverse Push

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Button

Key in Start

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Key in Stop

Key in Normal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Position

Mowing Mode

 

 

 

 

 

 

 

Key in Reverse

 

 

 

 

 

 

 

 

 

 

Caution Mode

Figure 3

12

Page 12
Image 12
Cub Cadet GT 3200 warranty C. Key Switch Module