Nortel Networks COOLPIXS610GR, COOLPIXS610BK user manual Error Messages, 121

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

For Users of the COOLPIX S610c

See the Wireless LAN Connection Guide for error messages that may be displayed with use of the wireless LAN feature.

Display	Problem	Solution	A
O(blinks)	Clock not set.	Set clock.	104
B	Battery running low.	Prepare to charge or	12, 16
		change battery.
N	Battery exhausted.	Charge or change battery.	12, 16
Battery
exhausted.
P	Battery temperature is	Turn off camera, and allow	15
Battery temperature	high.	battery to cool down
high		before resuming use. After
		five seconds, this message
		will disappear, the monitor
		will turn off, and the
		power-on lamp will blink
		rapidly. After the lamp
		blinks for three minutes,
		the camera will turn off
		automatically, but you can
		also press the power
		switch to turn it off
		manually.
Q(● blinks red)	Camera cannot focus.	Refocus.	26, 27	Technical
camera to finish	recording is complete.	when recording is	27
u	Camera cannot perform	Wait until message clears
Please wait for the	other operations until	from display automatically		Notes
recording.		complete.
N	Write-protect switch is in	Slide write-protect to	21
Memory card is write	“lock” position.	“write” position.
protected.

121