Nortel Networks COOLPIXS610BK Inserting the Battery into the Camera, Insert the battery

Inserting the Battery into the Camera

First Steps

Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.

•Charge the battery before the first use or when the battery is running low. For

more information about charging the battery, see “Charging the Battery Using the Battery Charger (COOLPIX S610)” (A 12) if you are using the COOLPIX S610, or “Charging the Battery Using the AC Adapter (COOLPIX S610c)” (A 16) if you are using the COOLPIX S610c.

1 Open the battery-chamber/memory card slot cover.

Slide the cover latch to the Yposition 1.

2Insert the battery.

Confirm that the positive (+) and negative (–) terminals are oriented correctly as described on the label at the entrance of the battery chamber, and insert the battery.

Use the battery to push the orange battery latch in the direction indicated by the arrow 1and fully insert the battery 2. When the battery is fully inserted, the battery latch will lock it in place.

BInserting the Battery

Inserting the battery upside down or backwards could damage the camera. Be sure to check the battery is in the correct orientation.

3Close the battery-chamber/memory card slot cover.

Slide the cover latch to the Zposition 2.

14