Nortel Networks COOLPIXS610BK, COOLPIXS610GR Connect the power cable, Charge the battery

First Steps

First Steps

Charging the Battery Using the Battery Charger (COOLPIX S610)

If you are using the COOLPIX S610, charge the Rechargeable Li-ion Battery EN-EL12 (supplied) using the Battery Charger MH-65 (supplied).

•If you are using the COOLPIX S610c, the Battery Charger MH-65 is not supplied

with the camera. Insert the battery into the camera and charge it by connecting the AC adapter. Proceed to “Inserting the Battery into the Camera” (A 14) and “Charging the Battery Using the AC Adapter (COOLPIX S610c)” (A 16).

1Connect the power cable.

Connect the power cable to the battery charger 1and insert the wall plug into a power outlet 2. The CHARGE lamp will light to show that the charger is on 3.

2

1

3

2 Charge the battery.

Insert the battery into the battery charger. Slide the battery forward 1and then press down until it locks into place 2.

CHARGE lamp starts blinking 3when battery is inserted. Charging is complete when lamp stops blinking 4.

About 150 minutes are required to charge a fully exhausted battery.

12