Nortel Networks COOLPIXS610GR, COOLPIXS610BK user manual Unplug the charger

Charging the Battery Using the Battery Charger (COOLPIX S610)

The following chart explains CHARGE lamp status.

CHARGE lamp	Description
Blinks	Battery charging.
On	Battery fully charged.
	The battery is not inserted correctly. Remove the battery and
	reinsert it into the battery charger so that the battery is lying flat.
	• Charge the battery indoors with an ambient temperature of
Flickers	5 °C to 35 °C (41 °F to 95 °F) before use.
	• The battery is faulty. Unplug the charger immediately and stop
	charging the battery. Bring the battery and charger to a Nikon-
	authorized service representative for inspection.

First Steps

3Unplug the charger.

Remove the battery and unplug the charger.

BNotes on the Battery Charger

•The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL12. Do not use with incompatible batteries.

•Be sure to read and follow the warnings for the battery charger on page iii before using the battery charger.

•Be sure to read the section, “The Battery” (A 119), thoroughly before use.

CNotes on AC Power Supply

• To power the camera continuously for extended periods, use the AC Adapter EH-63 (available separately from Nikon) (A 116). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

• If you are using the COOLPIX S610, the battery cannot be charged by inserting it into the camera and connecting the AC adapter. The AC adapter and the supplied audio/video cable or USB cable cannot be used at the same time.

13