Nortel Networks S610 Troubleshooting, Display, Settings and Power Supply, 125, Select Show info

Troubleshooting

If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers in the right-most column for more information.

For Users of the COOLPIX S610c

See the Wireless LAN Connection Guide for information on troubleshooting wireless LAN problems.

Display, Settings and Power Supply

Problem		Cause/Solution	A
Monitor is blank	•	Camera is off.	22
	•	Battery is exhausted.	22
	• Standby mode for saving power: press the		15, 27
		shutter-release button halfway.
	• When flash lamp blinks red, wait until flash		31
		has charged.
	• Camera and computer are connected via USB		70
		cable.
	• Camera and TV are connected via audio/		69
		video cable.
Monitor is hard to read	•	Adjust monitor brightness.	107
	• Monitor is dirty. Clean monitor.		120
	• Monitor has dimmed to save power. Monitor		15
		brightens when controls are used.
	• Use monitor brightness boost.		23
Camera turns off without	•	Battery is low.	22
warning	• Camera has turned off automatically to save		112
	•	power.
		Battery is cold.	119	Technical
Date and time of recording are	• Pictures recorded before clock has been set,		18
not correct		and “Date not set” indicator blinks during
		shooting, will have time stamp of “00/00/0000		Notes
		00:00”; movies and voice recordings will be
		dated “01/01/2008 00:00.”
	• Check camera clock regularly against more		104
		accurate timepieces and reset as required.
No indicators displayed in	Hide info is selected for Photo info.		107
monitor	Select Show info.

125