Nortel Networks COOLPIXS610GR Turn the Camera On and Select AAuto Mode, Press the kbutton

Basic Photography and Playback: Auto Mode

Basic Photography and Playback: Auto Mode

Step 1 Turn the Camera On and Select A(Auto) Mode

This section describes how to take pictures in A (auto) mode, an automatic, “point-and-shoot” mode recommended for first-time users of digital cameras.

1 Press the power switch to turn on the camera.

The power-on lamp (green) will light for a moment and the monitor will turn on. The lens will also extend.

Proceed to step 4 when Ais displayed.

2 Press the ebutton.

3 Use the rotary multi selector to choose Aand
	Shooting
press the kbutton.

The camera enters A (auto) mode.

4Check the battery level and number of exposures remaining in the monitor.

Battery level

Monitor	Description
NO INDICATOR Battery fully charged.

BBattery low; prepare to charge or replace the battery.

NCannot shoot. Recharge or

Battery	replace with a fully charged
exhausted.	battery.

Number of Exposures Remaining

Battery level indicator

16

Number of exposures remaining

The number of pictures that can be stored depends on the capacity of the internal memory or memory card and image mode setting (A84).

22