Nortel Networks COOLPIXS610BK user manual Electronically Controlled Cameras, 126, Troubleshooting

Troubleshooting

Problem	Cause/Solution	A
Date imprint not available	Camera clock has not been set.	18,
		104
Date not appearing on pictures	The date is not imprinted on movies or on	61, 108
even when Date imprint is	pictures taken in Panorama assist scene mode.
enabled
Camera settings reset	Backup battery is exhausted; all settings were	105
	restored to their default values.
Monitor turns off, and the	Battery temperature is high. Turn off camera,	15
power-on lamp blinks rapidly.	and allow battery to cool down before resuming
	use. After the lamp blinks for three minutes, the
	camera will turn off automatically, but you can
	also press the power switch to turn it off
	manually.

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, and then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to internal memory or the memory card at the time the problem occurred. Data already recorded will not be affected.

Shooting

Technical
	No picture taken when shutter-	•	When camera is in playback mode, press the	28
	Problem		Cause/Solution	A
Notes	release button is pressed	•	When menus are displayed, press the d	11
			c button.
		•	button.
			Battery is exhausted.	22
		•	When flash lamp blinks, flash is charging.	31
	Camera cannot focus	•	The intended subject is one with which	27
		•	autofocus does not perform well.
			Set AF assist in the setup menu to Auto.	110
		•	Focus error. Turn camera off and then on	15
			again.

126