Nortel Networks S610 UMotion Detection, HAF Assist, 110, Enable or disable AF-assist illumination

Basic Camera Setup: The Setup Menu

Shooting, Playback, and Setup Menus

UMotion Detection

Enable motion detection to reduce the effects of camera shake and subject movement when shooting still pictures.

When motion detection is enabled, the current setting is displayed in the monitor during shooting (A 6, 23).

Auto (default setting)

When camera detects the movement of the subject or camera shake, the shutter speed will be increased for reducing the effects of them.

However, motion detection does not function in the following situations.

•When the flash fires

•When any setting other than Auto is selected for ISO sensitivity (A89) in A (auto) mode

•When shooting in Night portrait (A37), Fireworks show (A40), or Backlight (A40) scene mode

Off

Motion detection is not enabled.

BNotes on Motion Detection

•Motion detection may be unable to completely reduce the camera shake and subject movement in some situations.

•Motion detection may not function if the subject exhibits significant movement or is too dark.

•The pictures taken may become somewhat grainy.

hAF Assist

Enable or disable AF-assist illumination.

Auto (default setting)

AF-assist illumination will be used to assist the focus operation when the subject is poorly lit. The illuminator has a range of about 3.0 m (9 ft. 10 in.) at the maximum wide-angle position and about 1.5 m (4 ft. 11 in.) at the maximum telephoto position. Note that for some scene modes, AF-assist illumination turns off automatically (A36).

Off

Disable this function. The camera may be unable to focus if lighting is poor.

110