Using the REVERSE CAUTION MODE key position
The REVERSE CAUTION MODE position of the key switch module allows the machine to be operated in reverse with the blades (PTO) engaged.
IMPORTANT: Mowing in reverse is not recommended.
Use extreme caution while operating the tractor in the “Reverse Caution Mode”. Always look down and behind before and while backing. Do not operate the tractor when children or oth- ers are around. Stop the tractor immediately if some- one enters the area.
To use the REVERSE CAUTION MODE, proceed as follows:
IMPORTANT: The operator MUST be seated in the tractor seat.
1.Start the engine as previously instructed in this Operator’s Manual.
2.Turn the key from the NORMAL MOWING (Green) position to the
REVERSE CAUTION MODE
(Yellow) position of the key switch module. Refer to Figure 10.
3.Depress the REVERSE PUSH
BUTTON (Orange/Triangular Button) at the top/right corner of the key switch module. The red indicator light at the top/left corner of the key switch module will be “ON” while activated. Refer to Figure 10.
4.Once activated (indicator light “ON”), the tractor can be driven in reverse with the cutting blades (PTO) engaged.
5.Always look down and behind before and while backing to make sure no children are around.
6.After resuming forward motion, return the key to the NORMAL MOWING position.
IMPORTANT: The REVERSE CAUTION MODE will remain activated until:
•The key switch is turned to either the NORMAL MOWING or STOP position.
•The operator leaves the seat. Follow the previous instructions to
Step 4 - Indicator Light comes “ON” to alert operator of activation
KEY SWITCH MODULE
Turn
Key 
Step 3 - Depress Reverse Push Button to activate
Step 2 - Turn Key to Reverse Caution Mode position
Step 1 - Start engine, release key, key returns to Normal Mowing position
Figure 10
18
