JVC CA-MXDVA9 manual Creating Your Own Sound Modes, ManualMode

Creating Your Own Sound Modes	4 Press SET again.
—Manual Mode

You can create SEA patterns to suit your preference. These changed settings can be stored in the MANUAL 1, MANUAL 2, and MANUAL 3 modes.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1 Select one of the preset sound modes.

•If you want to add the surround elements in your SEA pattern, select one of the sound modes (D.CLUB, HALL, or STADIUM) before starting the procedure below. (See “Selecting the Sound Modes” on page 13.)

2 Press and hold SET until “SEA CONT” appears on the display.

Ex.: When “D.CLUB” is selected as the sound mode.

Current level appears.

3 Adjust the SEA pattern.

1) Turn 4 / ¢ to select the frequency range to adjust (LOW, MID or HIGH).

2) Press ¡ or 1 to adjust the level (–3 to +3) of the selected frequency range.

3) Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

5 Turn 4 / ¢ to select one of the MANUAL 1, MANUAL 2, and MANUAL 3 modes into which you want to store the SEA pattern.

6 Press SET.

The SEA pattern you have created is stored into the MANUAL mode selected in step 5.

To use your own sound mode

Select MANUAL 1, MANUAL 2, or MANUAL 3 mode. See “Selecting the Sound Modes” on page 13.

When you unplug the AC power cord or if a power failure occurs

The setting will be erased in a few days. If this happens, set the manual sound modes again.

– 14 –