Selecting Playback Modes
Continued
This unit cannot accept any disc operations while reading disc contents.
Programming the Playing Order of the Titles and
4 Turn 4 / ¢ to select a title or track number, then press SET.
You can arrange the order in which the titles (for DVD) and tracks (for SVCD, VCD and CD) play before you start playing. You can program up to 18 steps.
•When you use Program play for a SVCD or VCD with the PBC function activated, the PBC function is turned off.
•Program play cannot be used on some DVD discs.
On the unit:
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
1 Load discs.
•If the current playing source is not the DVD/SVCD/ VCD/CD player press DVD 3¥8, then 7 before going to the next step.
Ex.: When SVCD, VCD or CD is a source disc.
5 To program another title or track from the same disc, repeat step 4.
To program another title or track from a different disc, repeat steps 3 and 4.
•Each time you select a title or track, the program item is added up to 18 steps.
6 Press DVD 3¥8.
The titles and tracks are played in the order you have programed.
To stop playing, press 7.
To go to the next title or track, turn 4 / ¢ to the right.
2 Press PROGRAM so that “PROGRAM” appears on the display.
The PRGM (program) indicator also lights up on the display.
•If a program has been stored in memory, the program is called up.
3 Press one of the disc number buttons (DVD1, DVD2 or DVD3) you want to program. 
Selected title or track number
Selected disc number | Program step number |
Ex.: When SVCD, VCD or CD is a source disc.
Even if you turn 4 / ¢ to the left
It just goes back to the beginning of the current title or track, but cannot go back to the previous titles or tracks.
To modify the program
You can modify the program before or after playing.
To erase the last step, press
CANCEL/DEMO.
• Each time you press the button, the last programed step is erased from the program.
To add steps in the program before playing,
simply select the disc number and title/track numbers you want to add by following steps 3 to 5 of the programming procedure.
To erase program completely, press 7 before or after playing.
The program you have made will be also erased,
•when you remove all the discs, and then press DVD 3¥8.
•when you unplug the AC power cord.
•when a power failure occurs.
To exit from Program play mode, press PROGRAM after playing. The PRGM (program) indicator goes off. The program you have made is memorized.
To check the programed contents
Press PLAY MODE on the remote control. The programed contents appear on the TV screen.
To erase the play mode screen, press PLAY MODE again.
