JVC CA-MXDVA9 SVCD/VCD/CD Playback, To go to another track, To use Time Search on the TV screen

DISC 3 TITLE 3 CHAP. 2 TIME 1:33:33 BITRATE 3.3 Mbps

1 2 3 4 5

1: Current disc number

2: Current title number

3: Current chapter number

4: Elapsed playing time of the current title

5: Transmission rate

To stop playing, press 7.

•This unit can memorize the stop point of SVCD and VCD, and when you start SVCD or VCD playback again by pressing DVD 3¥8 (or DVD 3 on the remote control), playback starts from where it has been stopped—Resume play. When using Resume play on SVCD or VCD with the PBC function, the playback starts from the earlier point you stop.

To use Resume play, you need to turn on the Resume function. (See page 42.)

•To stop completely, press 7 twice.

To remove the disc, press 0 for the corresponding disc tray.

SVCD/VCD/CD Playback

•To play back a DVD see page 19.

•While playing a SVCD or VCD with the PBC function loaded on the disc trays, the playback will stop when a disc menu appears. If a menu appears while playing a SVCD or VCD with PBC function, see “Menu-Driven Playback” on page 23.

1 Load discs.

2 Select the disc number button you want to play.

On the unit:

Press one of the disc number buttons (DVD1, DVD2, or

DVD3). On the remote control: Press one of the disc number

buttons (DVD 1, DVD 2, or DVD 3) while holding down SHIFT.

+

The unit starts reading the disc contents and “SVCD,” “VCD” or “CD” is shown on the display. Then the total playing time appears. (When SVCD or VCD with the PBC function is loaded, only “PBC” appears.)

Playback starts from the first track of the selected disc and the disc number lamp starts flashing.

Track numbers of the currently playing disc. (Numbers exceeding 16 are not displayed.)

Current track number Elapsed track playing time

To go to another track

Turn 4 / ¢ during playback (or press 4 or ¢ on the remote control).

•4: Goes back to the beginning of the current or previous tracks.

•¢: Skips to the beginning of the next or succeeding tracks.

To go to a particular track directly using the number buttons on the remote control

Pressing the number buttons before or during play allows you to start playing from the track number you want. Ex.: To select number 5, press 5.

To select number 10, press 10. To select number 20, press +10

then 10.

To select number 23, press +10, +10 then 3.

To use Time Search on the TV screen

•You cannot use this function while a SVCD or VCD with the PBC function is played back.

•You cannot use this function while using Random play.

On the remote control ONLY:

1 Press PLAY MODE during play.

The play mode screen appears.

2 Press CONTROL + or − to move to “TIME SEARCH,” then press

ENTER.

“GO TO _ _:_ _ ” appears on the TV screen.

CD CONTROL
REPEAT A-B REPEAT TIME SEARCH
GO TO	:

Ex.: When CD is a playing source.

– 21 –