JVC CA-MXDVA9 manual Canceling the Display Demonstration, Adjusting the Voltage Selector

To connect a TV

Connect your TV and this unit using the composite video cord (supplied) or an S-video cord (not supplied).

•You can also use JVC’s AV COMPU LINK control system. (See page 48.)

Now, you can plug the AC power cord.

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

•If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.

Composite video cord (supplied)

To composite video input

VIDEO OUT

VIDEO

S-VIDEO

S-video cord* (not supplied)

To S-video input

IMPORTANT: Be sure to check all connections to be done before plugging the AC power cord into a wall outlet.

Canceling the Display Demonstration

On the unit ONLY:

To cancel the display demonstration, press

CANCEL/DEMO until “DEMO OFF” appears on the display.

* Using an S-video cord gives you a better quality pictures.

TV

This unit is compatible with the color systems of PAL and NTSC. Check your TV’s color system and select the correct one by pressing and holding SET while the unit is turned off (on standby). Each time you press and hold the button, “PAL” and “NTSC” appears alternately.

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.

VOLTAGE

SELECTOR

230V

240V

127V
110V	Voltage mark

When you press other buttons

The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) unless you cancel it by pressing CANCEL/DEMO.

To start the display demonstration manually

Press and hold CANCEL/DEMO for more than 1 second.

Use a screwdriver to rotate the voltage selector so the voltage number the voltage mark is pointing at is the same as the voltage where you are plugging in the unit. (See the back cover page.)

DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.

– 10 –