JVC CA-MXDVA9 manual Selecting the Sources, Adjusting the Volume

Continued

Selecting the Sources

To listen to the FM/AM broadcasts, press FM/AM. (See page 15.)

To playback discs, press DVD 3¥8 (or DVD 3 on the remote control). (See pages 16 – 29.)

To playback tapes, press TAPE 2 3. (See page 30.)

To select the external equipment as the source, press AUX.

When you press the play button for a particular source (FM/AM, DVD 3/8 (or DVD 3 on the remote control), TAPE 2 3, and AUX), the unit turns on (and starts playing the source if it is ready).

Adjusting the Volume

Adjusting the Front Speaker Output Balance

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

On the remote control ONLY:

1 Press LEVEL SELECT until “L” and “R” appear on the display.

Initially the front speakers output balance is set to the center.

2 Press LEVEL + or – to adjust the front speaker output balance.

•Press LEVEL + to increase the right channel output.

•Press LEVEL – to increase the left channel output.

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted in 32 steps (VOL MIN, VOL 01—VOL 30, and VOL MAX).

Turn VOLUME + / – clockwise (+) to increase the volume or counterclockwise (–) to decrease it.

When using the remote control, press

VOL + to increase the volume or press VOL – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, a sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source next time. REMEMBER you cannot adjust the volume level while the unit is off (on standby).

To turn down the volume level temporarily

Press FADE MUTING on the remote control. The volume level gradually decreases to “VOL MIN.”

To restore the sound, press the button again.

•Turning VOLUME + / – clockwise (to +) on the unit or pressing VOL + on the remote control also restores the sound.

The line moves as you adjust.

– 12 –