JVC CA-MXDVA9 manual Connecting Other Equipment, To connect a center speaker and rear speakers

Continued

To connect a center speaker and rear speakers

By connecting a center speaker and rear speakers to the SURROUND SPEAKERS jacks, you can enjoy Dolby Digital and MPEG Multichannel sound, and the DSP Surround modes. (See page 31.)

Center speaker

	Center
	speaker
SURROUND SPEAKERS
REAR	CENTER
RIGHT LEFT
CAUTION:
IMPEDANCE
16	32

Left

front speaker

30˚

90˚

Left rear speaker

Right

front speaker

Subwoofer

(5.1ch OUT)

30˚

90˚

Right rear speaker

Right rear	Left rear
speaker	speaker

•Connect the right rear speaker to the REAR RIGHT jack.

•Connect the left rear speaker to the REAR LEFT jack.

•Connect the center speaker to the CENTER jack.

To connect a subwoofer

By connecting a subwoofer, you can reproduce the LFE signals recorded in multichannel software.

	Powered
SUB-	subwoofer
WOOFER
5.1ch OUT	(not supplied)

To input

Connect the input jack of a powered subwoofer to the SUB- WOOFER 5.1ch OUT jack, using a monaural audio cord (not supplied).

When using front multi speaker system, refer to “Recommended Main Speakers and Subwoofers Layout” separately attached.

Connecting Other Equipment

You can connect both analog and digital equipment.

•DO NOT connect any equipment while the unit is on.

•DO NOT plug in any equipment until all connections are complete.

To connect an analog component

Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.

Audio

equipment

To audio output

To prevent powered subwoofer from damaging

Set the powered subwoofer (not supplied) volume level to the minimum before selecting disc as a playing source. When playing a disc that has software with the LFE signals, then adjust the powered subwoofer volume to the desired level.

Ideal speaker layout

To enjoy multichannel sound, locate speakers as follows. If you cannot locate them like this, adjust the speaker setting by using the on-screen menu. (See page 40.)

•Do not place a speaker on another speaker, which may the piled speaker to fall down.

For playing the other equipment through this unit,

connect between the audio output jacks on the other equipment and the AUX IN jacks by using audio cords (not supplied).

Audio

equipment

To audio input

For recording sounds through this unit on the other

equipment, connect between the audio input jacks on the other equipment and the AUX OUT jacks by using an audio cord (not supplied).

•See “About sounds output through the rear terminals” on the next page.

–8 –