JVC CA-MXDVA9 manual Using the Timers, Using Daily Timer, How Daily Timer actually works

Using the Timers Continued

There are three timers available—Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 11.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off (on standby).

On the unit ONLY:

1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

indicator lights up and DAILY (Daily Timer) indicator also starts flashing on the display.

How Daily Timer actually works
The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the			• Each time you press the button, the timer setting modes
on-time comes (the		indicator continues flashing while the
			change as follows:
timer is operating). Then, when the off-time comes (“OFF”
flashes just before the off-time), the unit automatically turns							ON TIME		REC
					DAILY
off (on standby).						(Daily timer setting)
				Canceled			Clock	ON TIME
The Daily timer works everyday automatically. If you do not
want to use the Daily timer, turn off the Daily timer. (See “To							setting	(Recording
						(The hour digits		timer setting)
turn off or on Daily Timer after its setting is done” on the						start flashing.)
			2 Press CLOCK/TIMER again.
next page.) The timer setting remains in memory until you
change it.
			“ON TIME” appears for 2 seconds on the
•	There is a time limit in doing the following steps. If the
			display, then the unit enters on-time setting
	setting is canceled before you finish, start from step 1
			mode.
	again.
•	To correct a misentry while setting the timer, press
	CANCEL/DEMO.

Before you start...

•When using a DVD, SVCD or VCD as the source to play—

–Make sure that a TV is set to turn on at the setting time and the correct input mode is selected.

–Make sure there is a disc on the selected disc number tray.

•When using a CD as the source to play—

–Make sure there is a disc on the selected disc number tray.

•When using a tape as the source to play— –Make sure that a tape is in the deck whose deck

indicator (A or B) is lit on the display. –Make sure that the tape direction is correct.

•When using tuner as the source to play— –Set the preset stations.

•When using the external component as the source to play—

–Set the timer equipped on the external component at the same time.

3 Set the on-time you want the unit to turn on at.

1) Turn 4 / ¢ to set the hour, then press SET.

2)Turn 4 / ¢ to set the minute, then press SET.

“OFF TIME” appears for 2 seconds

on the display, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby) at.

1)Turn 4 / ¢ to set the hour, then press SET.

2)Turn 4 / ¢ to set the minute, then press SET. The unit enters source selecting mode.

– 44 –