Hunter Fan 90063 B22 B23, Tighten the wiring cover plate screw, between the motor and the housing

B20	F
	2
	1
	F

Install the wiring cover plate. Make sure all wiring connections are inside the box or under the wiring cover plate.

B21

G

Tighten the wiring cover plate screw.

B22 B23

H

Connect 4” duct and vent to the outside. Tape joints.	Connect wiring from the motor to the wiring cover plate.
If ducting does not fit securely, an adapter may need
to be purchased.

B24

H

Reinstall the motor by inserting the tabs and pushing up

into position. Make sure the wires are not pinched

between the motor and the housing.

10

41722_EngS_3.29.03.indd 10

B25

I

Secure the motor by tightening the 2 screws.

41722-01 3/29/2006

3/29/06 10:54:59 PM