Hunter Fan TypeB, TypeG installation manual Steps

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly..

Note: Both plug connectors are polarized and will only fit together one way.. Make sure the connectors are properly aligned before connecting them.. Incorrect connection could cause improper operation and damage to the product..

7-7. Place the lower switch housing assembly over the upper switch housing.. Align the side screw holes in the upper and lower switch housings.. Attach the lower switch housing to the upper switch housing with three housing assembly screws..

If you are not installing the light fixture, your installation is complete. Otherwise, proceed with step 7-8..

7-8. The last installation step when installing the light fixture is to install the glass bowl.. See “Installing the Glass Bowl” on page 13 for instructions..

Plug

Connector

Steps 7-6 – 7-7

Lower Switch

Housing

Plug

Connector

Detail

Housing

Assembly Screw

13

41847-01 • 05/28/10 • Hunter Fan Company