WARNING: Fan may fall if not assembled as directed in these installation instructions..
3-1.. Unbundle the wires from the fan..
For Standard or Angled mounting:
3-2.. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy and canopy trim ring.. Feed the wires from the fan through the downrod..
3-3.. Loosen the square head setscrew on the adapter to install the pipe and ball assembly.. Note: When the pipe and ball assembly is fully installed, 2-3 threads on the pipe will still be visible; this is normal.. Securely retighten the setscrew with a wrench or pliers.. Skip to Step 3-7..
CAUTION: The adapter has a special coating on the threads.. Do not remove this coating; the coating prevents the downrod from
unscrewing.. Once assembled, do not remove the downrod..
For Low Profile mounting:
Note: For low profile mounting, the downrod is replaced with the low profile washer..
3-4. Remove the setscrew from the adapter..
3-5.. Place the low profile washer (lip up) into the canopy.. Be sure the green ground wire is pointing up toward the ceiling..
3-6.. Align the holes in the washer with the holes in the adapter.. Assemble securely with three low profile screws..
3-7.. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim..
Step 3-7
U-shaped
Hole