Hunter Fan TypeB, TypeG installation manual Installing the Glass Bowl, Breakaway Connector

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Installing the Glass Bowl

7-16. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets..

7-17. Attach the extra pull chain (included) to the fan pull chain using the breakaway connector.. (You may find the breakaway connector on the end of the extra chain..)

7-18. Thread the fan pull chain through the hole in the metal disk.. Then, thread the fan pull chain through the hole in the center of the glass bowl..

7-19. Thread the light pull chain through the hole in the center of the glass bowl.. Then, Thread the light pull chain throught the hole in the center of the cover plate..

7-20. Thread the fan pull chain through the grommet hole in the side of the cover plate..

7-21. Place the cover plate up against the glass bowl.. Align the holes in the cover plate and glass bowl..

7-22. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight..

Breakaway

Connector

Light Bulbs (B10 Candelabra Base 60 Watt Maximum)

Metal Rod

Metal Disk

Glass Bowl

Cover Plate

Finial

15

41847-01 • 05/28/10 • Hunter Fan Company