5.3LUBRICATION

The pressure washer is designed with a permanent lubrication system. Conventional oil check and oil changes are not necessary.

NOTE: IN CASE OF OIL LEAKAGE, CONTACT THE HD POWERWASHER CUSTOMER SERVICE DEPARTMENT CONCERNING REPAIR. A SMALL AMOUNT OF OIL LEAKAGE IS NORMAL.

5.4WATER SCREEN

The pressure washer is equipped with a water inlet screen to protect the pump.

CAUTION: If the screen is not kept clean, the flow of water to the pressure washer will be restricted and the pump may be

CAUTION damaged.

λTo clean inner water screen, remove quick connect and remove the filter screen from the pump inlet.(see page 11, item 10)

λBackflush screen to clean

λReplace screen and quick connect immediately to prevent any foreign matter from entering the pump.

CAUTION: Do not damage the screen while removing or cleaning. Any foreign CAUTION particles entering the pump may damage

the pump.

5.5COOLING SYSTEM

The air vents, located in and around the pressure washer, must be kept clean and free of any obstructions to ensure proper air cooling of the motor during operation.

WARNING: Prevent water from penetrating the vents of the pressure washer to minimize the risk of damage to

CAUTION the machine and to reduce the risk of shock to the operator.

5.3LUBRIFICATION

Le nettoyeur est muni d’un système de lubrification permanent. Les vérifications de niveau et les vidanges ne sont pas nécessaires.

REMARQUE : COMMUNIQUEZ AVEC LE SERVICE

ÀLA CLIENTÈLE DE FAIP NORTH AMERICA. UNE LÉGÈRE FUITE D‘HUILE EST NORMALE.

5.4FILTRES À EAU

Le nettoyeur à haute pression est muni d’un grillage sur l’entrée d’eau afin de protéger la pompe.

ATTENTION : Si le grillage n'est pas propre, le jet d'eau en sera diminué, ce

ATTENTIONqui pourrait endommager la pompe.

λPour nettoyer la grille de protection interne, enlever le raccord rapide et enlever la grille de l’entrée de la pompe. (voir figure 10 à la page 11).

λBien rincer la grille pour la nettoyer.

λRemettre immédiatement en place la grille et le raccord rapide afin d’éviter la pénétration de matières étrangères dans la pompe.

ATTENTION : N'endommagez pas la grille lors du retrait ou du nettoyage de celle-ci. Toute particule étrangère

ATTENTION entrant dans la pompe pourrait l’endommager.

5.5SYSTÈME DE REFROIDISSEMENT

Les grilles d’aération situées à l’intérieur et autour du nettoyeur ne doivent pas être obstruées; elles permettent le refroidissement adéquat du moteur lors de l’utilisation.

ATTENTION : Empêchez l'eau de pénétrer par les grilles d’aération du nettoyeur afin de réduire les risques de

ATTENTION dommages au nettoyeur et les risques d’électrocution de l’utilisateur.

21

Page 20 Page 22
Page 21
Image 21
Husky 1650 PSL warranty Lubrication, Water Screen, Cooling System, Lubrification, Filtres À EAU, Système DE Refroidissement
Page 20 Page 22

1650 PSL specifications

The Husky 1650 PSL is a sophisticated and versatile injection molding machine specifically designed for high-performance applications across various industries. Renowned for its reliability and efficiency, the Husky 1650 PSL stands out as an optimized solution for companies requiring precision in their production lines.

One of the most notable features of the Husky 1650 PSL is its high-speed injection capabilities. This machine utilizes advanced hydraulics to deliver rapid injection cycles, resulting in shorter production times and enhanced productivity. The machine boasts a robust clamping force of 1650 tons, providing the necessary support for processing larger and more complex molds with precision.

In terms of technology, the Husky 1650 PSL incorporates a user-friendly, programmable control system that allows for real-time monitoring and adjustments. This feature makes it easy for operators to optimize the molding process based on specific requirements. Additionally, the machine is equipped with state-of-the-art servo technology, which significantly improves energy efficiency while reducing cycle times. This not only leads to lower operational costs but also enhances overall sustainability.

The machine's design includes a wide range of customizable options, allowing manufacturers to tailor the Husky 1650 PSL to their specific needs. The modular design supports integration with various auxiliary equipment, such as robots and conveyors, fostering a streamlined manufacturing process. Moreover, the machine's advanced cooling and heating systems ensure consistent temperatures for stable material processing, directly contributing to the quality of the final products.

Another standout feature of the Husky 1650 PSL is its compatibility with a variety of thermoplastic materials, making it an ideal choice for producing complex parts in industries ranging from automotive to consumer goods. The machine's versatility is further enhanced by its ability to work with multiple cavity molds, contributing to higher output while maintaining tight tolerances.

In conclusion, the Husky 1650 PSL is a powerful injection molding machine that combines high performance, advanced technology, and customization capabilities to meet the rigorous demands of modern manufacturing. Its innovative features not only improve production efficiency but also ensure the consistent quality of molded products, making it a valuable asset in any production facility.
Top Page Image Contents