Husqvarna 10530SBEB owner manual Table of Contents

Models: 10530SBEB

1 32
Download 32 pages 21.17 Kb
Page 3
Image 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the en- gine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16.Never touch a hot engine or muffler.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. Ithasbeendesigned,engineeredandmanufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- nicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECALATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

3.0 Quarts (3,4 Liters)

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 5W-30 or 10W-30

(API SG–SL):

(0°F to +40°F / –18°C to +5°C)

 

Synthetic SAE 5W-30 or 10W-30

 

(below 0°F / –18°C)

 

 

Oil Capacity:

28 Ounces (0,8 Liters)

 

 

Spark Plug:

Champion RC12YC

Gap:

0.030" (0,072 mm)

 

 

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for and using your snow thrower.

Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

WARRANTY

32

ASSEMBLY / PRE-OPERATION

5-7

OPERATION

8-13

MAINTENANCE

14-15

MAINTENANCE SCHEDULE

14

SERVICE AND ADJUSTMENTS

16-18

STORAGE

18

TROUBLESHOOTING

19

3 REPAIR PARTS

20-31

Page 3
Image 3
Husqvarna 10530SBEB owner manual Table of Contents

10530SBEB specifications

The Husqvarna 10530SBEB is a powerful snow blower designed for both residential and light commercial use, delivering exceptional performance in winter conditions. One of its standout features is the robust 305cc engine that ensures reliable starting and consistent snow-clearing power. This engine provides ample torque, allowing the machine to handle heavy, wet snow with ease.

Equipped with a 30-inch clearing width, the 10530SBEB can efficiently tackle large areas, making it ideal for homeowners with expansive driveways and sidewalks. The high-throw chute can send snow up to 50 feet away, reducing the need for multiple passes and making snow removal quicker and more efficient. The adjustable chute rotation and deflector allow users to direct snow exactly where they want it, providing added flexibility during operation.

The Husqvarna 10530SBEB features an innovative overhead-valve engine design, which contributes to better fuel efficiency and lower emissions. This eco-conscious design aligns with Husqvarna’s commitment to sustainability while still providing high performance. The machine also includes a 6-speed forward and 1-speed reverse transmission, enabling users to choose the optimal speed for various snow conditions.

A major highlight of the 10530SBEB is its augmented throwing capability, aided by the integral turbocharge feature. This technology enhances the snow-throwing distance, making it effective even in heavier snow falls. The machine is also designed with a wide, heavy-duty auger that efficiently breaks up packed snow, ensuring better performance on tough surfaces.

User comfort is prioritized in the Husqvarna 10530SBEB, featuring an ergonomic handle that reduces fatigue during extended use. The handle is also adjustable, accommodating users of different heights. For visibility, the snow blower comes with integrated LED headlights, allowing for safe operation in low-light conditions.

Durability is another key characteristic of the 10530SBEB, with its rugged construction designed to withstand tough winter conditions. The steel housing and reinforced components ensure longevity, while the easily accessible control panel simplifies operation for users of all experience levels.

Overall, the Husqvarna 10530SBEB is a versatile and robust snow blower that combines power, efficiency, and user-friendly features, making it a reliable choice for tackling winter’s challenges. Whether facing light flurries or heavy snowfalls, this model stands out as an excellent tool for snow removal, ensuring that driveways and walkways remain clear and safe.