SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before per- forming any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving

parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

SNOW THROWER

4. Connect spark plug wire to spark plug.

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 20)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

16

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 20

TO REMOVE BELT COVER (See Fig. 21)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 21

Page 16
Image 16
Husqvarna 10530SBEB Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

10530SBEB specifications

The Husqvarna 10530SBEB is a powerful snow blower designed for both residential and light commercial use, delivering exceptional performance in winter conditions. One of its standout features is the robust 305cc engine that ensures reliable starting and consistent snow-clearing power. This engine provides ample torque, allowing the machine to handle heavy, wet snow with ease.

Equipped with a 30-inch clearing width, the 10530SBEB can efficiently tackle large areas, making it ideal for homeowners with expansive driveways and sidewalks. The high-throw chute can send snow up to 50 feet away, reducing the need for multiple passes and making snow removal quicker and more efficient. The adjustable chute rotation and deflector allow users to direct snow exactly where they want it, providing added flexibility during operation.

The Husqvarna 10530SBEB features an innovative overhead-valve engine design, which contributes to better fuel efficiency and lower emissions. This eco-conscious design aligns with Husqvarna’s commitment to sustainability while still providing high performance. The machine also includes a 6-speed forward and 1-speed reverse transmission, enabling users to choose the optimal speed for various snow conditions.

A major highlight of the 10530SBEB is its augmented throwing capability, aided by the integral turbocharge feature. This technology enhances the snow-throwing distance, making it effective even in heavier snow falls. The machine is also designed with a wide, heavy-duty auger that efficiently breaks up packed snow, ensuring better performance on tough surfaces.

User comfort is prioritized in the Husqvarna 10530SBEB, featuring an ergonomic handle that reduces fatigue during extended use. The handle is also adjustable, accommodating users of different heights. For visibility, the snow blower comes with integrated LED headlights, allowing for safe operation in low-light conditions.

Durability is another key characteristic of the 10530SBEB, with its rugged construction designed to withstand tough winter conditions. The steel housing and reinforced components ensure longevity, while the easily accessible control panel simplifies operation for users of all experience levels.

Overall, the Husqvarna 10530SBEB is a versatile and robust snow blower that combines power, efficiency, and user-friendly features, making it a reliable choice for tackling winter’s challenges. Whether facing light flurries or heavy snowfalls, this model stands out as an excellent tool for snow removal, ensuring that driveways and walkways remain clear and safe.