JVC GR-AXM4U Getting S Tarted, Clock Lithium Battery Removal/Insertion, Viewfinder Adjustment

10GETTING STARTED (cont.)

Clock (Lithium) Battery Removal/Insertion

A

This battery is necessary for clock operation and to perform date/time settings.

SWITCH OFF POWER

1 Switch off the unit’s power and remove the power supply unit.

OPEN COVER

2 Open the clock battery compartment cover while pressing the release tab.

REMOVE BATTERY (when replacing)

3 Insert a pointed, non-metallic object between the battery and the compartment ( A ) and pull the battery out.

4

5

INSERT BATTERY

Ensuring the plus (+) side is up, insert a CR2025 lithium battery and push it in.

CLOSE COVER

Close the compartment cover until it clicks in place.

NOTE:

See “SAFETY PRECAUTIONS”(☞ pg. 2) for information on safe handling of lithium batteries.

Viewfinder Adjustment

1

2

POSITION VIEWFINDER

Adjust the viewfinder manually for best viewability (see illustration at left).

SELECT MODE

Set the power switch to CAMERA.

ADJUST DIOPTER

3 Turn the diopter adjustment control until the indications in the viewfinder are clearly focused.

Set POWER to "CAMERA".

NOTE:

When the power switch is set to CAMERA and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.