JVC GR-AXM4U Using The RM-V705U Remote Control Unit, Pull OUT Battery Holder, Functions, Buttons

Infrared beam effective area

10°5m(16.4ft)

30
°	30°
10°

Infrared beam sensor window

15

Using The RM-V705U Remote Control Unit

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional recording functions possible.

PULL OUT BATTERY HOLDER

1 Pull out the battery holder by inserting a pointed

A

The transmitted beam may not be effective or may cause incorrect operation when the infrared beam sensor window is directly exposed to sunlight or powerful lighting.

	1
2	7
	8
3	9
4	0
5	!
6	@

instrument into slot .

INSERT BATTERY

2 Insert the lithium battery *(CR2025), with its plus (+) side up, into the battery holder.

REPLACE BATTERY HOLDER

3 Insert the battery holder into the remote control unit, and push the holder until it clicks in place.

*Read warning on lithium battery. (☞ pg. 2)

2

3

A 1

		Functions
Buttons
	With the camcorder’s power switch		With the camcorder’s power switch set
	set to “CAMERA”.		to “PLAY”.
1Infrared beam	Transmits the beam signal.
transmitting window
2ZOOM (T/W) buttons	Zoom (invariable speed, ☞ pg. 19)		—
3PLAY button	—		Playback start (☞ pg. 37)
4STOP button	—		Stop (☞ pg. 37)
5REW button	Retake (Rewind) (☞ pg. 20)/		Rew/Rew Shuttle Search (☞ pg. 37)
	Quick Review (☞ pg. 19)
6INSERT button	—		Insert Editing (☞ pg. 45)
7START/STOP button	Functions same as the Recording Start/Stop button of the camcorder.
8INT. TIME button	Self-Timer(☞pg. 34)/Time Lapse (☞ pg. 36)		—
9REC TIME button	Animation/Time lapse (☞ pg. 35, 36)		—
0PAUSE button	—		Pause/Play (during Pause mode) (☞ pg. 37)
!FF button	Retake (Forward) (☞ pg. 20)		FF/FF Shuttle Search (☞ pg. 37)
@A. DUB button	—		Audio dubbing (☞ pg. 46)