JVC GR-AXM4U manual Feature, Purpose, Operation

RECORDING Basic Features

Zoom-in

WW WW

TTTT

Zoom-out

Zoom indicator bar

W

Zoom level indicator

T

LCD monitor or viewfinder

Power zoom lever

	19
FEATURE:	Zooming
PURPOSE:	To produce the zoom in/out effect, or
	an instantaneous change in image
	magnification.
OPERATION:	28X Hyper zoom
	Digital circuitry doubles the
	maximum 14x magnification offered
	by optical zoom.

1)To zoom in, slide the Zoom Lever toward “T”.

1)To zoom out, slide toward “W”.

NOTES: ● During Hyper Zoom, the speed

	increases the further you slide the
	Zoom Lever.
	● Focusing may be come unstable
	during Hyper Zoom. In this case,
	set the zoom while in Record –
	Standby, set manual focus or Focus
	Lock (☞ pg. 24, 25), then zoom in
	or out in Record mode.
	● The Zoom Level Indicator (5) only
	moves during optical zoom. Once
	the indicator reaches “T”, all
	magnification from that point is
	through digital processing.
	● During digital image processing,
	the quality of the image may suffer.
FEATURE:	Quick Review
PURPOSE:	To check the end of the last
	recording.
OPERATION:	1) Press “ ” and release quickly
	during the Record–Standby mode.
	• Tape is rewound for about
	2seconds and played back
	automati-cally, then pauses in
	Record–Standby mode for the
	next shot.
NOTE:	Distortion may occur at start of
	playback.
	This is normal.