Philips 46PP8745, 55PP8745 1, 9, 8, 2 3, 4 5, 6 7

USING THE MENUS :PICTURE

Using Manual Converge :Multipoint Red/Blue

The Multipoint Red/Blue convergence controls allow you to adjust

picture convergence at specific points on the TV screen.

Note : Allow the TV to warm up for 20 minutes before adjusting

convergence. Adjust Converge Red or Converge Blue before using

the Multipoint Red/Blue controls. See the previous page.

1Select MULTIPOINT RED or MULTIPOINTBLUE in

the MANUAL CONVERGE menu.

2Press the cursor right to enter navigate mode.

3Use the cursor left, right, up, or down to move to a cross

hair that has a color outline.

4Press the m(Status/Exit) key to enter adjust mode.

5Use the cursor left, right, up, or down to adjust the cross

hair until the color outline is gone.

6Press the mkey to return to navigate mode.

7Repeat steps 3–6 until all misaligned cross hairs have been

adjusted. Then press the MENU key.

8For your multipoint adjustments to be stored in the TV’s

memory, you must activate SAVE MULTIPOINT.

Note : If you are not satisfied with the adjustments you just

made and want to start over, you can use the UNDO

MULTIPOINT control. This control allows you to undo

the adjustments, but only if you use it before saving.

To save your multipoint adjustments : Select SAVE

MULTIPOINTand press the cursor left or right.

To undo your multipoint adjustments : Select UNDO

MULTIPOINT and press the cursor left or right.

To restore the TV’s picture convergence to factory settings,

select RESTORE FACTORYand press the cursor left or

right.

9Press the MENU key to return or the mkey to switch the

menu off.

to Navigate EXIT to Adjust

SAVE MULTIPOINT

UNDO MULTIPOINT

RESTORE FACTORY

PICTURE

MANUAL CONVERGE

•CONVERGE RED

•CONVERGE BLUE

MULTIPOINT RED •

‰

•MULTIPOINT BLUE

•SAVE MULTIPOINT

•

to Adjust EXIT to Navigateto Navigate EXIT to Adjust

to Adjust EXIT to Navigate

to Navigate EXIT to Adjust

to Adjust EXIT to Navigate

PICTURE

MANUAL CONVERGE

•CONVERGE RED

•CONVERGE BLUE

MULTIPOINT RED •

‰

•MULTIPOINT BLUE

•SAVE MULTIPOINT

•

PICTURE

MANUAL CONVERGE

•CONVERGE RED

•CONVERGE BLUE

•MULTIPOINT RED

•MULTIPOINT BLUE

SAVE MULTIPOINT •

‰

•

PICTURE

MANUAL CONVERGE

•CONVERGE RED

•CONVERGE BLUE

•MULTIPOINT RED

•MULTIPOINT BLUE

SAVE MULTIPOINT •

‰STORED

•

PICTURE

MANUAL CONVERGE

•CONVERGE BLUE

•MULTIPOINT RED

•MULTIPOINT BLUE

•SAVE MULTIPOINT

UNDO MULTIPOINT •

‰

•

PICTURE

MANUAL CONVERGE

•CONVERGE BLUE

•MULTIPOINT RED

•MULTIPOINT BLUE

•SAVE MULTIPOINT

UNDO MULTIPOINT •

‰RESTORED

•

PICTURE

MANUAL CONVERGE

•MULTIPOINT RED

•MULTIPOINT BLUE

•SAVE MULTIPOINT

•UNDO MULTIPOINT

RESTORE FACTORY •

‰

•

PICTURE

MANUAL CONVERGE

•MULTIPOINT RED

•MULTIPOINT BLUE

•SAVE MULTIPOINT

•UNDO MULTIPOINT

RESTORE FACTORY •

‰RESTORED

•