16
USING THE MENUS :PICTURE
Converge Red
Converge Red
PICTURE
MANUAL CONVERGE
G
CONVERGE RED
CONVERGE BLUE
MULTIPOINT RED
MULTIPOINT BLUE
SAVE MULTIPOINT

Using Manual Converge :Converge Red/Blue

Using the Auto IntelliSense®feature, you can automatically adjust con-
vergence in 20 seconds or less (see the previous page). Also, if you
desire, you can use the Manual Converge controls to make additional
convergence adjustments to suit your personal preferences or to further
fine-tune the picture.
Note : Allow the TVto warm up for 20 minutes before adjusting conver-
gence.
1Select MANUAL CONVERGE in the PICTURE menu.
2Press the cursor down and select either CONVERGE RED
or CONVERGE BLUE.
Note : If various images in the picture have red outlines,
select CONVERGE RED. If various images in the picture
have blue outlines, select CONVERGE BLUE.
3Use the cursor right, left, up, or down to adjust the cross
hair until the color outline is gone. The adjustment is auto-
matically saved in the TV’s memory when you exit the
adjust mode.
4Press the MENU key to return or the mkey to switch the
menu off.
Check the TV picture. If any color outlines remain around
the images, use the MULTIPOINTRED (for red outlines)
or MULTIPOINT BLUE (for blue outlines) control. See
the next section for instructions for using those controls.