Philips 55PP8745, 46PP8745 manual Connecting Peripheral, Video Recorder Playback, Equipment

Unplug the RF cable from the RF socket of your video recorder.

CONNECTING PERIPHERAL

Video Recorder : Playback

1 Connect the RF cable to the RF socket on your video recorder.

Connect another RF cable from the output of your video

2 recorder to the ANTENNA IN 75Ω socket on your TV.

Better playback quality can be obtained if you also connect the

3 Video, Audio Left and Right (only for stereo equipment) cables to the VIDEO and AUDIO L (mono) and R inputs of

INPUT-AV 2.

Note : In case of mono equipment, only the left loudspeaker

reproduces sound. Use a mono-to-stereo adaptor (not supplied) 2 for sound reproduction via the internal loudspeakers.

The MONITOR OUT connectors can be used for daisy chain- ing or recording programmes from your TV. See page 32.

S-VHS-Video quality with an S-VHS video recorder is obtained by connecting the S-VHS-Video cable with the S-VIDEOinput instead of connecting the video recorder to the VIDEO input.

See the handbook for the video recorder.

EQUIPMENT

CABLE

					REAR OF TV		1
					AV5-RGB, 480p/1080i-60Hz, 576p-50Hz
					AV4-480p/1080i-60Hz, 576p-50Hz
					G/Y
ANTENNA IN 75Ω					R/Pr
	INPUT-AV 1	MONITOR	INPUT-AV 2		SUBWOOFER
		OUT
		Y			B/Pb
	VIDEO		VIDEO
			S-	VIDEO
		Pb		L
					V
3	L		L		L	L
					SYNC
	AUDIO	Pr	AUDIO		AUDIO	AUDIO
					H
	R		R		R	R

	A/V OUT
RF OUT	RF IN
	VIDEO RECORDER

If You Do Not Make the Video and Audio

Connections in Step 3 Above :

Search for and store the test signal of the video recorder.

1

Switch on your TV and put the video recorder on the test signal or

2 play a prerecorded tape. See the handbook for your video recorder.

3

4

5

Search for the test signal of your video recorder in the same way you searched for and stored the TV signals. See pages 9 and 10.

Store the test signal under programme number 0 or between 90 and 99.

Replace the RF cable in the RF socket of your video recorder after you have stored the test signal.

29