Features and Controls
Read this Operator’s Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
A - 120 Volt AC, 20 Amp, Duplex Receptacles — May be used to supply electrical power for the operation of 120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool, and motor loads.
B - 120/240 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
C - Double Pole Circuit Breaker (AC) — A double pole circuit breaker is provided to protect all the receptacles and generator against electrical overload.
D - Fuel Valve — Used to turn fuel supply on and off to engine.
E - Grounding Fastener — Consult your local agency having jurisdiction for grounding requirements in your area.
F - Data Tag — Provides model, revision, and serial number
of generator. Please have these readily available when calling for assistance.
P
N
M
L
K
G - Choke Lever — Used when starting a cold engine.
H - Air Cleaner — Protects engine by filtering dust and debris out of intake air.
J - Recoil Starter — Used to start the engine. K - Oil Drain Plug — Drain engine oil here.
L - Rocker Switch — Set this switch to “On” before using recoil starter. Set switch to “Off” to stop engine.
M - Oil Fill Cap — Check and fill engine with oil here.
N - Fuel Tank — Capacity of seven (7) U.S. gallons (26.5 L).
P - Spark Arrester Muffler — Exhaust muffler lowers engine noise and is equipped with a spark arrester screen.
Items Not Shown:
Engine Identification — Provides model, type and code of engine. Please have these readily available if calling for assistance.
10 | www.usa.husqvarna.com |
