GENERAL SAFETY PRECAUTIONS

•File all the teeth to the same length. When the length of the cutting teeth is reduced to 0.16 inch (4 mm) the chain is worn out and should be replaced.

General advice on adjusting depth gauge setting

•When you sharpen the cutting tooth (A) the depth gauge setting (C) will decrease. To maintain optimal cutting performance the depth gauge (B) has to be filed down to achieve the recommended depth gauge setting. See instructions under the heading Technical data to find the correct depth gauge setting for your particular chain.

 

!

WARNING! The risk of kickback is

 

increased if the depth gauge setting is

 

 

too large!

 

 

 

Adjustment of depth gauge setting

•The cutting teeth should be newly sharpened before adjusting the depth gauge setting. We recommend that you adjust the depth gauge setting every third time you sharpen the cutting teeth. NOTE! This recommendation assumes that the length of the cutting teeth is not reduced excessively.

•You will need a flat file and a depth gauge tool. We recommend that you use our depth gauge tool to acheive the correct depth gauge setting and bevel for the depth gauge.

•Place the depth gauge tool over the chain. Detailed information regarding the use of the depth gauge tool, will be found on the package for the depth gauge tool. Use the flat file to file off the tip of the depth gauge that protrudes through the depth gauge tool. The depth gauge setting is correct when you no longer feel

resistance as you draw the file along the depth gauge tool.

Tensioning the chain

WARNING! A slack chain may jump off

! the bar and cause serious or even fatal injury.

The more you use a chain the longer it becomes. It is therefore important to adjust the chain regularly to take up the slack.

Check the chain tension every time you refuel. NOTE! A new chain has a running-in period during which you should check the tension more frequently.

Tension the chain as tightly as possible, but not so tight that you cannot pull it round freely by hand.

•Loosen the bar nuts that hold the clutch cover/chain brake. Use the combination spanner. Then tighten the bar nuts by hand as tight as you can.

•Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it does not sag from the underside of the bar.

•Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull the chain round freely by hand and that it does not sag from the underside of the bar.

14 – English

Page 13 Page 15
Page 14
Image 14
Husqvarna 1150901-95 manual Tensioning the chain
Page 13 Page 15

1150901-95 specifications

The Husqvarna 1150901-95 is a powerful and versatile chainsaw designed for both professional and home use. Known for its reliability and high-performance capabilities, this model stands out in the market for its advanced features and user-friendly design.

One of the main features of the Husqvarna 1150901-95 is its lightweight design. Weighing in at just 10.8 pounds, it provides excellent maneuverability, allowing users to handle various cutting tasks with ease. This makes it an ideal choice for homeowners who need a saw for occasional yard work as well as for professionals who require a tool that won’t fatigue them during long hours of operation.

Powering this chainsaw is a robust 40.9 cc X-Torq engine, which delivers a strong power-to-weight ratio. This engine technology ensures that users receive excellent fuel efficiency, helping reduce emissions while maximizing performance and cutting speed. The X-Torq technology provides significant torque at lower RPMs, allowing for smooth cutting through tough wood without bogging down the engine.

The Husqvarna 1150901-95 also features a revolutionary Air Injection system, which is designed to remove larger dust and debris particles before they reach the air filter. This innovation ensures that the engine maintains optimal performance even in challenging conditions, reducing the frequency of air filter cleaning and extending the lifespan of the saw.

Another key characteristic is the chainsaw's ergonomic design. It comes with an adjustable handle for enhanced comfort, allowing users to maintain a secure grip and better control over the saw while performing various cuts. The anti-vibration technology further minimizes fatigue, making it easier to handle for extended periods.

Safety is a priority with the Husqvarna 1150901-95, which includes features such as a chain brake that helps prevent injuries by stopping the chain instantly in the event of kickback. The saw also boasts a low kickback chain, which provides added protection during use.

In summary, the Husqvarna 1150901-95 is a well-rounded chainsaw that combines lightweight design, powerful performance, and innovative technologies. With its user-friendly features and commitment to safety, it is a reliable tool for anyone looking to tackle cutting tasks efficiently and confidently. Whether you are a seasoned professional or a weekend warrior, this chainsaw is built to meet your needs.
Top Page Image Contents