Contents | Husqvarna 1151322-95 specs

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the chain saw?	5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	6
Important	6
Always use common sense	7
Personal protective equipment	7
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the bar and chain	16
FUEL HANDLING
Fuel	17
Fueling	18
Fuel safety	18
STARTING AND STOPPING
Starting and stopping	19
WORKING TECHNIQUES
Before use:	21
General working instructions	21
How to avoid kickback	27
MAINTENANCE
General	29
Carburetor adjustment	29
Checking, maintaining and servicing chain saw
safety equipment	30
Mufﬂer	32
Starter	33
Air ﬁlter	34
Spark plug	35
Lubricating the bar tip sprocket	35
Needle bearing lubrication	35
Adjustment of the oil pump	35
Cooling system	36
”Air Injection” centrifugal cleaning	36
Winter use	36
Heated handles	36
Maintenance schedule	38
TECHNICAL DATA
Technical data	39
Saw chain ﬁling and ﬁle gauges	40

FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	41
AMERICAN STANDARD SAFETY
PRECAUTIONS
Safety precautions for chain saw users	42

English – 3

Image 3

Husqvarna 1151322-95 manual Contents

Contents

English 365 372XP You will ﬁnd the following labels on your chain saw KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Dear customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety Precautions Chain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipment General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guard General rules Stop switchCutting equipment Mufﬂer Cutting equipment designed to reduce kickback BarChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge setting Tensioning the chain Lubricating cutting equipment Filling with chain oilChecking chain lubrication Chain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Assembly Fitting the bar and chainWorking with the chain Fuel Fuel Handling Long-term storage Fuel safetyFueling Transport and storage Warm engine Starting and StoppingStarting and stopping Cold engine Stopping General working instructions Basic safety rulesWorking Techniques Before use General rules Terms Basic cutting technique Safe distance Tree felling techniqueLimbing Log is supported at one end. There is a high risk Felling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cut How to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Checking the front hand guard Correctly adjusted carburetorHigh speed jet H Checking brake band wear Immediately Checking the inertia brake release Mufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Must always be replaced Air ﬁlterChanging a broken recoil spring Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Spark plug Winter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Cooling system Electrical carburetor heating CanadaOther countries Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Your Warranty Rights and Obligations Federal Emission Control Warranty Statement Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw Other safety precautionsPage 1151322-95