Stopping | Husqvarna 1153136-26 instruction

STARTING AND STOPPING

•Never start a chain saw unless the bar, chain and all covers are ﬁtted correctly. See instructions under the heading Assembly. Without a bar and chain attached to the chain saw the clutch can come loose and cause serious injury.

•The chain brake should be activated when starting. Se instructions under the heading Start and stop. Do not drop start. This method is very dangerous because you may lose control of the saw. (52)

•Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Always hold the saw with both hands. The right hand should be on the rear handle, and the left hand on the front handle. All people, whether right or left handed, should use this grip. Use a ﬁrm grip with thumbs and ﬁngers encircling the chain saw handles.

Stopping

Stop the engine by pushing the start/stop switch down.

(53)

CAUTION! The start/stop switch automatically returns to run position. To avoid involuntary start up, the spark plug cap must always be removed from the spark plug when the machine is unsupervised. (54)

1153136-26 Rev.1 2009-12-29

English – 21

Image 21

Husqvarna 1153136-26 manual Stopping

Contents

445 445e 450e English 1153136-26 Rev.1 3839 4243 1153136-26 Rev.1 English 102 Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Decompression valve The valve Contents What is what on the chain saw? IntroductionDear Customer Before using a new chain saw General Safety Precautions Always use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guard Throttle lockout Stop switchChain catcher Vibration damping system Cutting equipment Sharpening your chain and adjusting depth gauge settingGeneral rules Cutting equipment designed to reduce kickback Tensioning the chain Lubricating cutting equipment Bar Fitting the bar and chain Assembly445 445e, 450e Fuel Fuel Handling Fuelling Fuel safetyTransport and storage Long-term storage Starting and stopping Starting and StoppingStarting Cold engine Stopping Working Techniques Basic safety rulesBefore use General working instructions Basic cutting technique TermsLimbing Tree felling technique How to avoid kickback What is kickback?Freeing a tree that has fallen badly Maintenance Carburettor adjustmentGeneral Starter MufﬂerRight hand guard Replacing the starter cord Spark plug Air ﬁlterLubricating the bar tip sprocket Needle bearing lubrication Temperature -5C or colder Air Injection centrifugal cleaningCooling system Winter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Bar and chain combinations EN ISO 12100-22003, Cispr 122005, EN ISO EC-declaration of conformity Applies to Europe only English 1153136-26 Rev.1 1153136-26 Rev.1 English Original instructions 1153136-26