Bar and chain combinations | Husqvarna 1153177-26 instruction

TECHNICAL DATA

Bar and chain combinations

The following cutting attachments are approved for the model Husqvarna 395XP.

			Bar			Chain

	Length, inch	Pitch, inch	Gauge, mm	Max. nose radius	Type	Length, drive links (no.)

	18	3/8		11T		68

	20	3/8		11T		72

	24	3/8		11T		84

	28	3/8	1,5	11T	Husqvarna H42	92

	18	3/8		34 mm		68
	18	3/8		34 mm		68

	20	3/8		34 mm		72

	24	3/8		34 mm		84

	28	3/8		34 mm		92

	24	0,404		34 mm		76

	28	0,404	1,6	34 mm	Husqvarna H64	84

	30	0,404		42 mm		92
	30	0,404		42 mm		92

	36	0,404		42 mm		104

Saw chain ﬁling and ﬁle gauges

English – 41

Image 41

Husqvarna 1153177-26 manual Bar and chain combinations, Saw chain ﬁling and ﬁle gauges

Contents

395XP, 395XPG Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear Customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety Precautions Always use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Cutting equipment Stop switchVibration damping system Mufﬂer Cutting equipment designed to reduce kickback General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingSharpening instructions considerably Increases the risk of kickback Adjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Too large Which could lead to serious, even fatal injuries Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Operator Fitting the bar and chain AssemblyFitting a spike bumper Working with the chain Fuel Fuel Handling Fuelling Fuel safetyTransport and storage Long-term storage Starting and stopping Starting and StoppingCold engine Warm engine Stopping Working Techniques Basic safety rulesBefore use General working instructions Jam. Always stop the engine before cleaning Not safely controlled with one hand Basic cutting techniqueHandles with both hands General Limbing Procedures drastically increase the riskLogs are lying together. Such Or fatal injury Safe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreat Felling cut Directional cuts Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs Carburettor with movement limiters MaintenanceCarburettor adjustment Carburettor without movement limiters Recommended engine speeds are as follows Checking the front hand guard Checking brake band wear Immediately Checking the inertia brake release Mufﬂer Changing a broken recoil spring Changing a broken or worn starter cordTensioning the recoil spring Spark plug Air ﬁlterLubricating the bar tip sprocket Fitting the starter Air Injection centrifugal cleaning Adjustment of the oil pumpNeedle bearing lubrication Cooling system Heated handles Winter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Bar and chain combinations EN ISO 12100-22003, Cispr 122005, EN ISO EC-declaration of conformityApplies to Europe only Page Original instructions 1153177-26