What is WHAT?

What is what on the chain saw?

1Cylinder cover

2 Front handle

3 Front hand guard

4 Starter

5 Chain oil tank

6 Starter handle

7 Adjuster screws carburettor

8 Choke control

9 Rear handle

10 Stop switch (Ignition on/off switch.)

11 Fuel tank

12 Mufﬂer

13 Bar tip sprocket

14 Chain

15 Bar

16 Spike bumper

17Chain catcher (Catches chain if it jumps or breaks.)

18Clutch cover with built-in chain brake.

19Right hand guard (Protects right hand if chain breaks or jumps.)

20Throttle control

21Throttle lockout (Prevents accidental operation of throttle control.)

22Decompression valve

23Combination spanner

24Chain tensioning screw

25Operator′s manual

26Bar guard

27Air ﬁlter cover

28Lever for extra chain oil.

29Half throttle lock button.

30Product and serial number plate

31Information and warning decal

English – 5

Page 5

Image 5

Husqvarna 1153183-26 manual What is WHAT?, What is what on the chain saw?

Contents

3120XP Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear Customer Introduction What is what on the chain saw? What is WHAT? Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping system Cutting equipment Stop switchMufﬂer General rules Bar Sharpening your chain and adjusting depth gauge settingChain General information on sharpening cutting teeth Too large Increased if the depth gauge setting isAdjustment of depth gauge setting Lubricating cutting equipment Tensioning the chainCause serious or even fatal injury Filling with chain oil Chain drive sprocket Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipment Bar Working with the chain AssemblyFitting the bar and chain Fuel Fuel Handling Extra chain oil Fuel safetyFuelling Long-term storage Transport and storage Starting and stopping Starting and StoppingCold engine Warm engine Stopping Working Techniques Basic safety rulesBefore use General working instructions Working Techniques Limbing Basic cutting techniqueTerms Felling direction Tree felling techniqueSafe distance Directional cuts Clearing the trunk and preparing your retreatFelling cut Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tension Cutting the trunk into logs How to avoid kickbackWhat is kickback? Carburettor Maintenance High speed jet H Correctly adjusted carburettor Checking the brake trigger Changing a broken or worn starter cord MufﬂerStarter Fitting the starter Tensioning the recoil springChanging a broken recoil spring Lubricating the bar tip sprocket Air ﬁlterSpark plug Running when making adjustments Adjustment of the oil pumpNeedle bearing lubrication Cooling system Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Bar and chain combinations Applies to Europe only EC-declaration of conformityEN ISO 12100-22003, Cispr 122005, EN ISO 0404/09/2119Page Page Page Page Original instructions 1153183-26