Transport and storage, Long-term storage | Husqvarna 1153183-26

FUEL HANDLING

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked ﬂames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station.

•The bar guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Secure the machine during transport.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

English – 19

Image 19

Husqvarna 1153183-26 manual Transport and storage, Long-term storage

Contents

3120XP Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear Customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guard General rules Stop switchCutting equipment Mufﬂer General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingBar Chain Adjustment of depth gauge setting Increased if the depth gauge setting isToo large Filling with chain oil Tensioning the chainLubricating cutting equipment Cause serious or even fatal injury Checking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubrication Bar Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel Handling Fuelling Fuel safetyExtra chain oil Long-term storage Transport and storage Warm engine Starting and StoppingStarting and stopping Cold engine Stopping General working instructions Basic safety rulesWorking Techniques Before use Working Techniques Terms Basic cutting techniqueLimbing Safe distance Tree felling techniqueFelling direction Felling cut Clearing the trunk and preparing your retreatDirectional cuts Cutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped tree What is kickback? How to avoid kickbackCutting the trunk into logs Carburettor Maintenance High speed jet H Correctly adjusted carburettor Checking the brake trigger Starter MufﬂerChanging a broken or worn starter cord Changing a broken recoil spring Tensioning the recoil springFitting the starter Spark plug Air ﬁlterLubricating the bar tip sprocket Cooling system Adjustment of the oil pumpRunning when making adjustments Needle bearing lubrication Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges Bar and chain combinations 0404/09/2119 EC-declaration of conformityApplies to Europe only EN ISO 12100-22003, Cispr 122005, EN ISOPage Page Page Page Original instructions 1153183-26