SMix and pour fuel in an outdoor area on bare ground; store fuel in a cool, dry, well ventilated place; and use an approved, marked container for all fuel purposes. Wipe up all fuel spills before starting saw.

SMove at least 10 feet (3 meters) from fuel- ing site before starting engine.

STurn the engine off and let saw cool in a non-combustible area, not on dry leaves, straw, paper, etc. Slowly remove fuel cap

and refuel unit.

SStore the unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

KICKBACK

WARNING: Avoid kickback which can result in serious injury. Kickback is the backward, upward or sudden forward motion of the guide bar occurring when the saw chain near the upper tip of the guide bar con- tacts any object such as a log or branch, or when the wood closes in and pinches the saw chain in the cut. Contacting a foreign ob- ject in the wood can also result in loss of chain saw control.

SRotational Kickback can occur when the moving chain contacts an object at the up- per tip of the guide bar. This contact can cause the chain to dig into the object, which stops the chain for an instant. The result is a lightning fast, reverse reaction which kicks the guide bar up and back to- ward the operator.

SPinch-Kickbackcan occur when the the wood closes in and pinches the moving saw chain in the cut along the top of the guide bar and the saw chain is suddenly stopped. This sudden stopping of the chain results in a reversal of the chain force used to cut wood and causes the saw to move in the opposite direction of the chain rotation. The saw is driven straight back toward the operator.

S Pull-Incan occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.

Avoid Pinch-Kickback:

S Be extremely aware of situations or ob- structions that can cause material to pinch the top of or otherwise stop the chain.

SDo not cut more than one log at a time.

SDo not twist the saw as the bar is with- drawn from an undercut when bucking.

Avoid Pull-In:

SAlways begin cutting with the engine at full speed and the saw housing against wood.

S Use wedges made of plastic or wood. Never use metal to hold the cut open.

Kickback Path

Avoid Obstructions

Clear The Working Area

REDUCE THE CHANCE OF

KICKBACK

S Recognize that kickback can happen. With a basic understanding of kickback, you can reduce the element of surprise which contributes to accidents.

SNever let the moving chain contact any ob-

ject at the tip of the guide bar.

SKeep the working area free from obstruc- tions such as other trees, branches, rocks, fences, stumps, etc. Eliminate or avoid any obstruction that your saw chain could

hit while you are cutting. When cutting a branch, do not let the guide bar contact branch or other objects around it.

SKeep your saw chain sharp and properly tensioned. A loose or dull chain can in- crease the chance of kickback occurring. Follow manufacturer’s chain sharpening and maintenance instructions. Check ten- sion at regular intervals with the engine stopped, never with the engine running.

Make sure the chain brake nuts are se- curely tightened after tensioning the chain.

SBegin and continue cutting at full speed. If the chain is moving at a slower speed,

there is greater chance of kickback occur- ring.

SCut one log at a time.

SUse extreme caution when re-entering a previous cut.

SDo not attempt cuts starting with the tip of

the bar (plunge cuts).

SWatch for shifting logs or other forces that could close a cut and pinch or fall into

chain.

SUse the Reduced--Kickback Guide Bar and Low--Kickback Chain specified for your saw.

MAINTAIN CONTROL

Stand to the left of the saw

Thumb on underside of handlebar

Never reverse hand positions

4

Page 3 Page 5
Page 4
Image 4
Husqvarna 137, 142 Reduce the Chance Kickback, Maintain Control, Refuel unit, Do not cut more than one log at a time
Page 3 Page 5

137, 142 specifications

The Husqvarna 137 and 142 are popular chainsaw models known for their reliability and performance, catering to both residential and light professional use. Bringing together a blend of innovative technologies and user-friendly features, these models have been designed to ensure that tasks such as tree pruning, firewood cutting, and light felling can be conducted efficiently and safely.

One of the standout features of both the Husqvarna 137 and 142 is their lightweight construction. Weighing in at approximately 4.5 kg, these chainsaws are easy to handle, particularly for users who may need to work for extended periods. This lightweight design significantly reduces fatigue, enabling operators to work longer without the weariness often associated with heavy machinery.

Powering these chainsaws is a robust 2.0 kW engine, which delivers an optimal balance of performance and efficiency. The engine has been engineered to provide a fast and consistent chain speed, allowing for clean and precise cuts. An efficient air filtration system contributes to the longevity of the engine, ensuring less frequent cleaning and maintenance. This feature is particularly advantageous for users who rely on their equipment for frequent tasks.

Both models come equipped with an automatic oil pump that ensures proper lubrication of the chain and bar during operation. This feature not only extends the life of the chainsaw but also enhances cutting efficiency. Additionally, the chain tensioning system is designed for easy adjustments, providing users with the ability to maintain the proper tension with minimal effort.

Safety is also a key consideration in the design of the Husqvarna 137 and 142. These models feature a chain brake that effectively stops the chain's movement in the event of kickback, protecting the operator from potential injury. Furthermore, the anti-vibration technology integrated into the handles helps to reduce vibrations felt by the user, contributing to a more comfortable and safer operating experience.

The ergonomic design is complemented by an intuitive layout, with controls that are easy to access and operate. The combination of performance, safety features, and user-centric design makes the Husqvarna 137 and 142 excellent choices for anyone needing a dependable chainsaw for various tasks. These models offer a powerful, efficient, and comfortable experience, making them an ideal investment for both hobbyists and occasional users alike.
Top Page Image Contents