ASSEMBLY
Fitting the guard extension
CAUTION! The guard extension shall always be fitted when using the trimmer head/plastic blades and combination guard. The guard extension shall always be removed when using the grass blade and combination guard.
Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt.
Enter the guard extension guide in the slot of the combination guard. Then click the guard extension into position on the guard with the four
The guard extension is removed easily using a screwdriver, see illustration.
Fitting a blade guard, grass blade and grass cutter
•Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt (L). Use the recommended blade guard. See the Technical data section. CAUTION! Ensure that the guard extension is removed.
A
•Fit the drive disc (B) on the output shaft.
•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.
•Insert the locking pin (C) in the hole to lock the shaft.
•Place the blade (D), support cup (E) and support flange (F) on the output shaft.
•Fit the nut (G). The nut must be tightened to a torque of
G
E
F
D
B
C
Fitting the trimmer guard and trimmer head
•Fit the correct trimmer guard (A) for use with the trimmer head. CAUTION! Ensure that the guard extension is fitted.
H
L
M
C B
A
AM L
•Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).
•Fit the drive disc (B) on the output shaft.
•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.
14 – English
