Lubrication
Checking the transmission oil level
1Remove the transmission cover. Undo the two screws (one on each side) and lift off the transmission cover.
2 Check that there is oil in the transmission’s oil tank.
Rider 175 Fill if necessary with engine oil SAE 10W/30 (class
Rider 175 AWD Fill if necessary with engine oil SAE 10W/ 40 (class
The oil and filter should be changed by an authorised service representative, as described in the Workshop Manual.
Work on the system entails particular demands on cleanliness and the system must be vented before the machine is used.
Lubricating the belt adjuster
The belt adjuster should be lubricated regularly using good quality molybdenum disulphide grease*.
Lubricate using a grease gun, 1 nipple from the
With daily use, lubrication should be carried out twice weekly.
General lubrication
All joints and bearings are lubricated using molybdenum disulphide grease during manufacture. Continue to lubricate using the same type of grease *. Lubricate the steering and control wires using engine oil.
Carry out this lubrication regularly; with daily use, the machine should be lubricated twice weekly.
*Grease from
English – 31