Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna 175 AWD manual Cutting height adjustment lever, Seat, Fuelling, Presentation

Models: 175 175 AWD

1 36

Download 36 pages 27.85 Kb

Page 14

Cutting height adjustment lever

PRESENTATION

If the lock button is pressed in and the lever is moved forwards the unit will be lowered and the blades will automatically start to rotate (mowing position).

The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn.

Cutting height adjustment lever

The cutting height can be adjusted to 7 different positions with the cutting height lever.

Combi-unit 40-90 mm (1 9/16” - 3 9/16”)

Seat

The seat has a jointed attachment on the front edge and can be tipped forward.

The seat can also be adjusted lengthways.

Loosen the handles under the seat and adjust it forwards or backwards to the desired position.

Fuelling

The engine runs on unleaded petrol with a minimum octane rating of 85 (not mixed with oil). We recommend the use of biodegradable alkylate petrol. (max. methanol 5%, max. ethanol 10%, max. MTBE 15%)

Do not ﬁll the tank completely, leave an expansion area of at least 2.5 cm (1“).

WARNING! Petrol is highly inﬂammable.

!Exercise care and refuel outdoors (see safety instructions).

IMPORTANT INFORMATION Do not use the fuel tank as a support area.

14 – English

Image 14

Husqvarna 175 AWD Cutting height adjustment lever, Seat, Fuelling, WARNING! Petrol is highly inﬂammable, Presentation

Contents

English Rider 175 Rider 175 AWDOperator′s manual CONTENTS CONTENTSContents Service journalAfter the ﬁrst 8 hours Service journalPre-delivery service Driving and transport on public roads INTRODUCTIONDear Customer TowingINTRODUCTION Good serviceSerial Number KEY TO SYMBOLS SymbolsLift up the cutting unit Apply the parking brake KEY TO SYMBOLSCheck the engine’s oil level Check the hydrostat’s oil level If the engine is cold, use the chokeInsure your Rider SAFETY INSTRUCTIONSSafety instructions General useWARNING! You must use approved personal Driving on slopesThis is what you do IMPORTANT INFORMATIONChildren MaintenanceWARNING! The battery contains lead and WARNING! The engine and the exhaustIMPORTANT INFORMATION TransportSAFETY INSTRUCTIONS WHAT IS WHAT? Location of the controlsThrottle control/choke control PRESENTATIONPresentation Speed limiterSeat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions FuellingStart the engine DrivingBefore starting WARNING! Never run the engine indoors, inDriving the Rider Starting the engine with a weak batteryConnecting the jump leads Remove the cables in the reverse orderWARNING! Clear the lawn from stones and Cutting tipsStop the engine other objects which can be thrown out by the bladesRelease lever Rider Release leverRelease lever Rider 175 AWD DrivingDaily maintenance MaintenanceMaintenance schedule WARNING! No service procedures must be conducted on theRemoving of the machine hoods CleaningChecking and adjusting the steering wires Engine coverChecking and adjusting of throttle wire Adjusting the parking brake RiderAdjusting the parking brake Rider 175 AWD WARNING! A poorly adjusted parking brakeWARNING! The exhaust system is hot. Let it Replacement of fuel ﬁlterReplacing the air ﬁlter cool before starting to replace the air ﬁlterChecking the fuel pump’s air ﬁlter Check the level of the battery acidProcedures on contact with acid Ignition systemCheck the safety system MaintenanceChecking the tyre pressure when the engine is running. Mind your ﬁngersMain fuse Checking the engine’s cooling air intakeWARNING! Observe caution to avoid trapping your hand Checking and adjustment of the cutting unit’s ground pressureRemoving the cutting unit MaintenanceThere is a risk of crush injuries when working with the belt Adjusting the parallelism of the cutting unithands when working with the blades Checking the cutting unit’s parallelismMaintenance Service position for the cutting unitPlacing in the service position WARNING! Wear protective glasses whenRemoving the BioClip plug Restoring from service positionChecking the blades MaintenanceChanging the oil ﬁlter LubricationChecking the engine’s oil level Replacing the engine oilGeneral lubrication Lubricating the belt adjusterChecking the transmission oil level LubricationProcedure Troubleshooting scheduleProblem Winter storage ServiceStorage GuardRider Technical dataDimensions Rider 175 AWDEC-declaration of conformity Applies to Europe only Technical data1150315-26 ´z+R?T¶6&¨ ´z+R?T¶6&¨