Toshiba B-570 manual Threshold Manual Fine Adjustment for the Feed Gap Sensor, R E S H O L D T

6. DIAG. TEST OPERATION

EM18-33010A (Revision Date: Dec. 10 ‘99)

6.3 PARAMETER SETTING MODE

6.3.14 Threshold Manual Fine Adjustment for the Feed Gap Sensor

Power off

Turn on the power while holding down the [FEED] key and [PAUSE] key.

< 1 > D I A G N O S T I C V 1 . O A

Press the [PAUSE] key.

< 2 > P A R A M E T E R S E T

Press the [PAUSE] key sixteen times.

T H R E S H O L D T 1 . 4 V

Press the [FEED] key or [RESTART] key to fine adjust the feed gap sensor manual threshold.

■[FEED] key:

Pressing the [FEED] key onetime is a -0.1V change, up to 0.0V

■[RESTART] key:

Pressing the [RESTART] key onetime is a +0.1V change, up to 4.0V.

Press the [FEED] key and [RESTART] key at the

same time.

Press the [PAUSE] key.

Continued on Section

6.3.15Kanji Code Selection.

NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast forward.

2.A changed threshold fine adjustment value is stored in memory by pressing the [PAUSE] key.

3.The above operations do not require any more threshold setting.

6-34