Toshiba B-570 manual Paper End Setting for Black Mark Sensor, Feed key Former value is displayed

6. DIAG. TEST OPERATION

EM18-33010A (Revision Date: Jan. 14 ’99)

6.5 SENSOR SETTING MODE

6.5.4Paper End Setting for Black Mark Sensor

Paper end setting should be performed after replacing the CPU PC board or changing the tag paper to other maker’s one, or when a paper feed error occurs.

Power off

Turn on the power while holding down the [FEED] key and [PAUSE] key.

< 1 > D I A G N O S T I C V 1 . O A

Press the [FEED] key three times.

<4 > S E N S O R A D J U S T M E N T

Press the [PAUSE] key four times.

		[ P E L E V E L . R ]	4 . 3 V
Press	the [FEED] key			The former value is displayed.
and	[RESTART] key	Remove any paper
at the	same time.
		from the sensor detecting
		area.

Holding the [FEED] key or [RESTART] key down until an asterisk ( * ) is displayed. (More than 3 seconds.)

Ex)

[ P E L E V E L . R ] 4 . 3 V *

(See NOTE.)

Indicates setting complete.

Press the [PAUSE] key for

Paper End Setting for

Feed Gap Sensor.

NOTE: Pressing the [PAUSE] key validates the sensor setting. The value of the sensor is displayed up to 5.0 V.

6-51