Toshiba B-570 manual Ribbon Motor Drive Voltage Fine Adjustment, Press the Pause key eleven times

6. DIAG. TEST OPERATION

EM18-33010A (Revision Date Jun. 28, ’96)

6.3 PARAMETER SETTING MODE

6.3.10Ribbon Motor Drive Voltage Fine Adjustment

Power off

Turn on the power while holding down the [FEED] key and [PAUSE] key.

< 1 > D I A G N O S T I C V 1 . O A

Press the [FEED] key.

< 2 > P A R A M E T E R S E T

Press the [PAUSE] key eleven times.

R I B B O N A D J < F W D > + 0

(Ribbon feed motor voltage fine adjustment)

Press the [FEED] or [RESTART] key to fine adjust the feed motor voltage. (See NOTE 1.)

Press the [PAUSE] key. (See NOTE 3.)

■ [FEED] key:	Pressing the [FEED] key one time is a
	-1 step change, up to -15 steps.
	(See NOTE 2.)

■[RESTART]key: Pressing the [RESTART] key one time is a -1 step change, up to -15 steps. (See NOTE 2.)

R I B B O N A D J < B A K > + 0

(Ribbon rewind motor voltage fine adjustment)

Press the [FEED] or [RESTART] key to fine adjust the rewind motor voltage. (See NOTE 1.)

■ [FEED] key:	Pressing the [FEED] key one time is a
	-1 step change, up to -15 steps.
	(See NOTE 2.)

■[RESTART]key: Pressing the [RESTART] key one time is a -1 step change, up to -15 steps. (See NOTE 2.)

Press the [FEED] key and [RESTART] key at the same time.

NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast forward.

2.Max. fine adjustment -15 steps = Key fine adjustment value (-15 steps) + PC fine adjustment value (-15 steps)

When the value reaches the maximum, the value remains unchanged even if the subsequent fine adjustment is performed.

3.A changed motor voltage value is stored in memory by pressing the [PAUSE] key.

4.One step corresponds to 5% of the standard voltage and up to 75% of the voltage can be decreased.

6-30