6. DIAG. TEST OPERATION
SVO8A1002 : Jan. 19, '98
6.3 PARAMETER SETTING MODE
6.3.12 Stacker Selection
Power off
Turn on the power while holding down the [FEED] key and [PAUSE] key.
< 1 > D I A G N O S T I C | V 1 . O A |
Press the [PAUSE] key.
< 2 > P A R A M E T E R S E T
Press the [PAUSE] key fourteen times.
S T A C K E R S Y S T E M O F F
Press the [FEED] key or [RESTART] key to select ON or OFF to the stacker.
■[FEED] key:
ON: Stacker is used.
■[RESTART] key:
OFF: Stacker is not used.
Press the [PAUSE] key.
Press the [FEED] key and [RESTART] key at the same time.
Continued on Section
6.3.13Threshold Manual Fine Adjustment for the Black Mark Sensor.
NOTE: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast forward.
2. A changed Stacker selection is stored in memory by pressing the [PAUSE] key.
