SAFETY INSTRUCTIONS

1 Undo the bar nuts that hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can.

2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it hangs slack on the underside of the bar.

3Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull

the chain round freely by hand and that it is not slack on the bottom of the bar.

The position of the chain tensioning screw varies from model to model. See the” What is what” section to find out where it is on your saw.

4Lubricating cutting equipment

!Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, even fatal injuries.

A Chain oil

•Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather.

•As a chainsaw manufacturer we have developed an optimal chain oil which, with its vegetable oil base, is also biodegradable. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage.

•If our own chain oil is not available, standard chain oil is recommended.

•In areas where oil specifically for lubrication of saw chains is unavailable, ordinary EP 90 transmission oil may be used.

•Never use waste oil!

This is dangerous for yourself, the saw and the environment.

BFilling with chain oil

• All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The sizes of the chain oil tank and fuel tank have been chosen so that the saw will run out of fuel before running out of oil. This means that you should never run with a dry chain.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a weak

mixture may mean that the fuel lasts longer than the oil). You should also use the recommended cutting equipment (a bar that is too long will use more chain oil). The above conditions also apply to models with an adjustable oil pump.

14 – English

Page 13 Page 15
Page 14
Image 14
Husqvarna 261 manual Lubricating cutting equipment, Chain oil, Filling with chain oil
Page 13 Page 15

261 specifications

The Husqvarna 261 is a robust and versatile chainsaw designed for professional use, particularly appealing to forestry workers, and those engaged in tree care and maintenance. This model stands out for its balance of power and lightweight design, making it an excellent choice for those who need a reliable tool for extended use.

One of the standout features of the Husqvarna 261 is its efficient 50.1cc engine, which delivers impressive cutting performance while maintaining low fuel consumption. This model incorporates a X-Torq engine technology that reduces emissions, making it an environmentally friendly option that complies with stringent regulations. Users can benefit from increased torque over a wide RPM range, resulting in optimal cutting performance even in tough conditions.

Another significant characteristic of the Husqvarna 261 is its LowVib technology. This system effectively reduces vibrations, allowing operators to work longer with minimal fatigue. The ergonomic design of the chainsaw, combined with a comfortable grip, further enhances user control and reduces strain during operation.

Safety is a priority in the design of the Husqvarna 261. It is equipped with an inertia chain brake that stops the chain immediately in case of kickback, protecting the user from potential injury. The chainsaw also features an adjustable oil pump, allowing for precise lubrication of the chain according to the user's specific needs, thus prolonging the life of both the chain and the guide bar.

The air filtration system is another key feature that sets the Husqvarna 261 apart. The innovative design includes a three-piece air filter that effectively keeps dust and debris from entering the engine, ensuring long-lasting performance and reduced maintenance. Furthermore, the quick-release cover allows for easy access to the air filter and spark plug, simplifying routine maintenance tasks.

Overall, the Husqvarna 261 combines advanced technology with user-friendly features, making it a standout choice for professionals who require reliability and performance. Its robust design, coupled with safety features and efficient engine technology, ensures that it can handle the demanding tasks across various cutting applications, establishing it as a preferred tool in the chainsaw market. Whether for logging, landscaping, or general tree work, the Husqvarna 261 is engineered to meet and exceed the expectations of discerning users.
Top Page Image Contents